Adura™ FDA is made using a specially developed Nylon copolymer with all the durability you expect from Nylon.
It has a lower crystallinity compared to other Nylons, which makes it better suitable and easier to use in FFF-printing.
Adura™ has a very low shrinkage rate which allows for printing parts with tight tolerances and with minimal warpage. This enables users to create functional parts with a specific size requirement.
The material furthermore complies with all the requirements of the FDA regulations 21 CFR 177.1500. It is however the responsibility of the customer/user/printer to go thru any and all certifications for the final prints to also be FDA certified.
|Material ||Adura™ FDA |
|Diameter tolerance ||± 0.025 mm |
|Heated build platform ||>50 °C |
|Print temperature ||245-270 °C |
|Continuous work temp ||110°C |
|UV resistance ||High |
|Chemcial resistance ||High |
|Hygroscopy ||High |
|Wear resistance ||High |
|Spool size ||200 x 55 mm (500 g) |
|Spool hub diameter ||52 mm |
|Weight empty spool ||215 g |
|Weight filament ||500 g|